Succubus Revealed Epilogue

We were married at sunset. Some might not consider that an auspicious time, but for me, it was a perfect compromise. I had wanted to be married in the daytime, outdoors, with sunlight streaming everywhere. Seeing as Cody and Peter wanted to attend, however, the sun presented a little difficulty. And since Peter had essentially acted as wedding coordinator for me, it seemed kind of mean to exclude him. So, we held the ceremony at sunset, and the vampires were able to show up for the reception the instant the sun sank below the horizon. The wedding was held on the grounds of a beachfront resort on Puget Sound. We stood on a grassy hill, facing west toward the water. It was high summer, and everything was bathed in orange and gold. The bridesmaids (all Mortensen girls) wore red dresses that looked as though they'd been designed with the sunset in mind and carried white clusters of stephanotis. Our only nod to decorations was an ivy-strewn arch that the officiant stood in front of. With so much beauty around us, nothing else had seemed necessary. I repeated my vows while holding Seth's hands. Each word I spoke was infinitely powerful, and yet I wouldn't really remember any of them until later. For those minutes, my whole world was focused on his face, on the amber gold of his eyes and the way the light played off his hair. Love burned within me and between us, making everything else a fog of indistinct details. There was only Seth and me. Me and Seth. There was a dreamlike quality to it all. The moments seemed suspended in time. And yet, afterward, when I looked back, it was as though the entire ceremony had taken place in the blink of an eye. We had a couple hundred people who had gathered to watch us. They all rose from their folding chairs and clapped when we kissed, and I found myself unable to stop grinning when I looked out into that sea of happy faces. The reception was held on the same grounds, just a little ways from the ceremony. We'd gone to a bit more work with the decorations here. The tables were draped with white linens and bedecked with flowers and candles that created little twinkles of light in the evening shadows. Large torches were set up along the boundaries as well, their flames flicking rapidly as wind picked up from the water. A jazz band set up nearby and began to play, providing background music for dinner. They had a space for dancing afterward too, though I didn't dance nearly as much as I'd expected to at my wedding. There were too many people to see, too many people to thank for their support. So Seth and I walked around hand in hand, going from group to group of those we loved. â€Å"I knew those Asiatic lilies would be a good call,† Peter told us conspiratorially, admiring one of the table arrangements. â€Å"The Oriental ones are bigger, but I feel like these complement the roses so much better.† â€Å"You're a regular flower whisperer,† said Hugh, knocking back a drink. He held up his glass to Seth and me in a mock toast. â€Å"Honestly, your best bit of planning was the open bar.† â€Å"Because it certainly wasn't the band,† remarked Doug, strolling over to where my little group was standing. â€Å"Geez, Kincaid – † He paused and reconsidered. â€Å"Geez, Mortensens, why didn't you hire me? Nocturnal Admission could've totally rocked this place out.† I smiled, happy that Doug had come. I honestly hadn't been sure if he would. â€Å"Because I wouldn't want to burden you guys with the strain of playing family-friendly music for three hours.† â€Å"Very considerate,† he said. He glanced around, nodding grudgingly. â€Å"Aside from that – and the fact that the bridesmaids are all under eighteen – I gotta admit, you put on a pretty good spread.† â€Å"Thank you,† Peter and I said in unison. â€Å"I kind of agree with Doug about the band,† said Cody. â€Å"I asked them if they'd play ‘The Chicken Dance,' and they said no.† â€Å"I could've done a bitchin' cover of that,† said Doug solemnly. â€Å"It's not so much a failing on the band's part as it was a request of ours to not play it,† said Seth. â€Å"Sad,† said Doug. He slung an arm around Cody. â€Å"Want to go make a bar run with me?† When Cody nodded, Doug glanced at the rest of us. â€Å"Refill anyone?† â€Å"No, thanks,† I said. Doug shook his head. â€Å"Married for an hour, and you're already picking up his good habits.† He and Cody walked off, having an intense discussion about â€Å"The Chicken Dance,† judging from their pantomimes. I leaned my head against Seth, content with everything and everyone in the world. â€Å"You did a beautiful job, Peter,† I said. â€Å"Seriously. It all turned out great.† Considering how underappreciated Peter always felt, I would've expected him to revel in the praise, but he actually turned modest. â€Å"Ah, well. You guys are the main attraction. I just provided the – â€Å" He stopped speaking, and as one, he and Hugh glanced off beyond the edge of the torches, into the darkness. â€Å"What is it?† I asked. They exchanged looks. â€Å"Carter,† said Peter. I followed their gaze, unable to see anything beyond the lit perimeter. It had been very easy to become human again, but there were still a few things I had trouble shaking. The loss of my immortal senses was one. Even now, it was weird to be standing with Peter and Hugh and not feel them. Their night vision was no better than mine – well, actually, I supposed Peter's was – but it wasn't their eyes that had alerted them to Carter's presence. â€Å"I think he wants to see you,† said Hugh gently. I stared off at where they indicated, uncertain what should I do. â€Å"Go,† said Seth softly. â€Å"You should talk to him.† I looked up at him, into those eyes so full of love, and forgot about Carter for the space of heartbeat. It was still too unbelievable to accept sometimes that this was my life, that Seth was my husband. I pressed my lips to his in a quick kiss. â€Å"I'll be right back,† I said. I picked my way through my guests, finding it difficult not to stop and talk to the many well-wishers. When I was out of the safety of the tents and tables, the wind hit me, whipping my hair and veil around and playing with my skirts. My dress had a sweetheart neckline and full skirt with many tiers and layers. I'd wanted a princess dress for my wedding day and had gotten one, though it made this walk a little awkward. I soon spotted Carter, standing so perfectly still among some trees that he might have been one. â€Å"Mrs. Mortensen,† he greeted me, when I reached him. â€Å"Congratulations.† He wore worn gray suit pants, a longsleeved white shirt with the first couple buttons open, and loosely knotted gray and pink silk tie. A jacket matched the pants and looked like it was two sizes too big. I nodded in approval. â€Å"Nice of you to dress up,† I said. â€Å"I don't think I've ever seen you in anything so formal.† â€Å"I should've checked with Peter to find out your colors,† said Carter, running a hand through his hair. It didn't look like it had been brushed for the occasion. â€Å"Sorry if I clash.† I smiled. â€Å"You look great. Thank you for coming.† â€Å"Well,† he said. â€Å"We left off kind of abruptly.† â€Å"That we did,† I murmured. This was the first time I'd seen him since the trial. â€Å"Jerome's not with you?† â€Å"No. You won't be seeing him anymore. Well.† Carter paused a moment. â€Å"Let's just say, I hope you won't be seeing him anymore.† â€Å"I plan on staying off Hell's radar,† I said honestly. He nodded, turning serious. â€Å"That's good. That's kind of why I'm here. I've got two gifts for you. Gifts of information.† â€Å"You were checking my registry,† I said. â€Å"How sweet.† We didn't have much light, but I swore, I could see his gray eyes twinkle. â€Å"You said you'll stay off their radar, but believe me, they're going to still have their eyes on you. Hell doesn't lose many souls the way they lost yours. If they can get it back, they will. They'll try. I know how close you are to them. . . .† His gaze drifted back toward the reception. â€Å"To Hugh, Peter, and Cody. But it'd be better for you – and for them – if you stayed away from them. If you moved away from them, to someplace where you don't know any of the local immortals.† I stared in astonishment. â€Å"Are you saying one of them might try to get my soul? They're my friends.† â€Å"I know, I know. And I don't think they would, exactly, but it's an ugly position for them to be in. You should really think about leaving Seattle. You'll make it easier on everyone if you just remove that temptation.† â€Å"I love Seattle,† I said, turning back to look across the dark water. â€Å"But I love Seth more. I'll talk to him. Andrea's been doing better, so we can go. I don't know where, but we'll figure it out.† I sighed and looked back at him. â€Å"Is your other piece of information less depressing?† The smile reappeared on his lips. â€Å"Yes. It's a big secret.† He leaned toward me and said in a stage whisper, â€Å"You're going to have a baby in December.† A matching smile came over me. â€Å"That's no secret. Not to me, at least.† Seth and I had known for a little while and had decided to keep it under wraps until after the wedding. We weren't going to be able to hide it much longer. I was three months pregnant, and without shape-shifting, I was subject to the rules of nature. It was a wonder I still fit in this dress. â€Å"Okay,† said Carter. â€Å"Then try this: it's a girl.† I felt my smile grow. â€Å"That I didn't know.† Or did I? A sudden flashback to the dream Nyx had shown me played through my mind. I hadn't thought about it in a very long time. Why did I need to? I was living my own dream. But in a flash, I saw it again, me holding a small girl as we waited outside for her father to come home. And it was snowing†¦. You should really think about leaving Seattle. â€Å"What are you thinking?† asked Carter, studying me. â€Å"I'm thinking there might be a short list of places I'll be moving to.† I shivered, both from the cold and the memories, and he draped his worn suit jacket over my bare shoulders. â€Å"I'm moving too,† he told me. I blinked away from my memories. â€Å"You are? Where? Why?† He chose to answer the last one. â€Å"Because my job here is done. Time to go on to another.† It took me a moment to follow. â€Å"You don't mean . . . I was your assignment? I'm why you came to Seattle?† He answered with a shrug. â€Å"But . . . no,† I protested. â€Å"There must be other things you do here, right? Other angelic tasks?† â€Å"Weren't you enough?† he teased. I was still in disbelief. Carter had been in Seattle for as many years as me. Surely there must have been more to it. Admittedly, no one in Hell ever really understood how the angels worked on their assignments. They didn't have the same level of micromanaging as my former employees. â€Å"I'm just one person. One soul. All your work and energy . . . I mean, it can't all have been just for one soul. An angel can't be solely dedicated to that.† â€Å"Well,† he said, clearly enjoying my confusion. â€Å"It was actually for two souls, since you and Seth were both saved. But even if it wasn't, it still would've been worth it. Do you know the price of one soul, Georgina? It's beyond rubies and diamonds, beyond any mortal reckoning. If it had taken me centuries, if it had taken a dozen more angels to help me, it all would have been worth it.† I lowered my head, feeling tears come to my eyes. I thought about how often I'd disparaged Carter, how many times I'd scoffed at the silly, hard-drinking persona he put on. Yet, no matter how much I dismissed him, Carter had always been there in the background, always showing interest in Seth and me. He'd protected me and given me advice, and I spent most of my time mocking him. â€Å"I'm not worthy of that,† I said. I might be human now, but I understood how powerful a heavenly creature Carter was. â€Å"I don't deserve that much regard.† He reached out and tipped my chin up. â€Å"You do, Georgina. And if you don't believe me now, then strive to be. Live your life. Be kind. Love those you know. Love those you don't know. Be worthy of your soul.† A tear escaped, rolling down my cheek and probably messing up my mortal mascara. â€Å"Thank you, Carter. Thank you for everything.† â€Å"There's nothing to thank me for,† he replied. With a sigh, he glanced up at the starry night. â€Å"I should be going. And your guests are probably looking for you. I'm sure they've been banging on glasses with their spoons this entire time.† â€Å"Wait – before you go . . .† I hesitated. Carter had already told me so much, but I had to know one other thing. â€Å"What happened to Roman? Is he dead?† Carter's amused expression faded. â€Å"Ah. I don't know.† â€Å"Carter – â€Å" â€Å"I mean it,† he said. â€Å"That's the straightest answer you'll ever get from an angel. I don't know. I don't think his outcome was good, but I don't know for sure.† I swallowed back more tears. â€Å"He shouldn't have gone.† â€Å"It was his choice, Georgina. He wanted to make a point to Heaven and Hell . . . that, and well, there's more. He did it out of love, and that's no small thing. A sacrifice born of love is almost as powerful a thing as a redeemed soul. Both of them are blows to Hell.† â€Å"I wish . . . I wish I could've said good-bye. Told him how grateful I am.† â€Å"I think he knows,† said Carter. â€Å"I think he knew exactly what he was getting into and deemed it worthwhile. The best way to thank him now is to do what I said. Live your life to its fullest. Take care of your husband and daughter, and let your soul shine.† I nodded. â€Å"I will. Thank you.† I almost asked about Yasmine too but had a feeling the answer would be the same: she'd made her decision. I could only be responsible for my fate, not everyone else's. â€Å"Bless you, daughter of man,† Carter said, his eyes luminous and almost silver now. He leaned down and kissed my forehead. I closed my eyes and caught my breath. His lips were both burning hot and icy cold. A sense of peace and power flooded me, and for a moment, it was as though I were right on the edge of comprehending all the beauty in the world. I opened my eyes. He was gone. I stood alone on the windswept hill, with the moon starting to shine on the water. In the distance, I heard the laughter and chatter of those I loved and sensed the warmth they held. Picking up my skirts, still wearing Carter's jacket over my shoulders, I headed off toward my husband and the rest of my life, off to be worthy of my soul.

Provide Support to Manage Pain and Discomfort Essay

Outcome 1 Understand approaches to managing pain and discomfort 1.1 Holistic care takes care of the whole person not just the physical needs (eg. Pain) but it also their mental and emotional needs (eg. Being afraid, not knowing what’s wrong), their social needs and their spiritual needs. This is important because the purpose is to ensure the individual is comfortable and brings peace and dignity as well as supports the individual’s family. 1.2 There are different approaches to alleviate pain and minimise discomfort which can include drugs, physical methods, self-help methods or alternative methods. Drugs can be used for pain relief, these can include analgesics such as asprin, paracetamol, opiates such as morphine, anti-infammatories such as ibuprofen, anaesthetic blocks such as an epidural. Drugs that are supplied on a prescription for pain relief are likely to be analgesics. In some extreme cases of severe or prolonged pain an individual may be given opiates. Physical methods to relieve pain may include massage (superficial or pressure), transcutaneous electrical nerve stimulation (tens), repositioning. Self-help methods can help relieve pain and have been found to be effective this can include moving or walking about (if possible), having a warm bath, doing something to take their mind off the pain, doing recommended exercises. Alternative therapies can often help relieve pain. Alternative therapies can include using aromatherapy, reflexology, acupuncture, yoga and meditation. 1.3 The individuals care plan should have information about the best way to manage their pain also to enable them to rest and sleep. The care plan should always be checked before you start to work with the individual who you are supporting and making comfortable. It is important that you enter any new information into the care plan so that your colleagues can take appropriate action. It is important that you take the necessary steps to keep information confidential in line with the data protection act 1988. Outcome 2 Be able to assist in minimising individuals pain or discomfort 2.1 Pain and discomfort may affect an individual’s wellbeing and communication because pain and discomfort can affect the amount and quality of sleep that individuals can get. Sleep deprivation can affect individuals day to day  living, it can make people irritable which can affect the way they communicate with others. It isn’t always easy for an individual to express the discomfort they are in as everybody experiences pain in different ways. 2.2 It is important to encourage an individual to express their feelings of discomfort or pain so that you can ensure you are able to assist them in the most beneficial way. It is important that the individual doesn’t feel like a nuisance. A way to find out how much pain the individual is in, you could ask them to put it on a scale of 1-10 1 being mild discomfort and 10 being the worst pain that they have ever felt. That way you get an understanding o f the level of pain. Read more:  Provide Support to Manage Pain and Discomfort Essay 2.3 To encourage an individual to use self-help methods of pan control you could assist them too change the position that they are sat/ laying in or provide them with a hot water bottle. Sometimes encouraging an individual to take part in an activity or talking to them can distract them from the pain/ discomfort they may be in. Self-help methods can be beneficial because it give the individual control on how they deal with their own pain. 2.4 It is important to ensure that the individual is as comfortable as possible, pain can be a hindrance to an individual’s personal comfort. If an individual needs turning during the night then it is important that it is don with as little disturbance as possible. Everybody has their own preferred way to be positioned to sleep or rest. You should check the individuals preferred positions that they feel comfortable in to ensure that they have a comfortable sleep/rest. Some individuals may have to rest propped up or sitting in a chair due to m edical conditions. You should check their care plan to see if there are any positions they need to maintain. 2.5 The individuals care plan will include a plan for dealing with any pain that the individual may experience. It is important that you offer sympathy and support to the individual in pain. If the individual is suffering in pain because they have had an accident or got an injury then you will need to discuss it with your manager or senior who may need to request a medical assessment so that the appropriate pain relief can be prescribed. It is important that the individual who you are supporting is asked what help and support they would like to receive. Outcome 3 Be able to monitor, record and report on the management of individuals pain or discomfort. 3.1 An individual’s pain and discomfort  levels should be monitored regularly, this shows if there are any changes. It will also show if the pain relieving methods are effective or not. It is important that if you are have any difficulty assessing an individual’s pain then you should let your manager know. You should never guess because you may get it wrong. You could use a pain scoring sheet to get an idea of the level of pain. 3.2 When recording an individual’s comfort, sleep and rest it should be accurate and contain all the information so that other care workers can continue to support them. Never assume about an individual’s comfort or sleep levels. One way you could record an individual’s comfort or sleep levels is you could observe them or you could ask them. It is important that the correct information is recorded because how an individual has slept may affect the care and support that is required after periods of rest. It should be written clearly so that it is understood easily. Care records are legal documents, not completing a care record is just as bad as not completing it correctly. 3.3 It is important that if an individual is in pain it should be recorded especially if it is a different type of pain. You should record an individual’s pain is better or worse. If an individual is becoming reliant on pain medication then it needs to be recorded so that the doctor can review it. Some individuals may find it difficult to sleep, relax or rest this will also need to be recorded so that the issue can be resolved for the individual.

Hiring a Plant Manager

A plant manager oversees all daily operations of a plant. He often is in charge of everything from production and manufacturing to making sure policies and procedures are followed in all departments. Supervising and motivating staff members generally are major parts of the job as well. The plant’s physical operations generally are the main responsibility of the plant manager. He is required to maintain a clean plant free of safety or health concerns.The production equipment and machinery should be meticulously cared for to avoid lapses in the manufacturing process and to ensure quality control standards are upheld. The manager of the plant may also be required to constantly monitor workers to spot any procedural infractions and correct them in a timely manner. In addition to managing daily plant functions, the manager may be responsible for creating and following a budget and preparing profit and loss projections.This requires proficiency in math and skills in creating reports and spreadsheets utilizing commercially produced and in-house software programs. The ability to interpret reports and statistics from outside agencies is also an important skill needed by a plant manager. Having a trustworthy and competent administrative staff in place helps the manager run a productive and profitable facility. From the human resources manager to the person in charge of ordering raw materials for production, the excellence of the supervisorial staff’s performance is often imperative to the overall success of the plant.The plant manager generally relies on these staff members to maintain good employee relations, quality control standards and meet production deadlines. The plant manager also may attend departmental meetings to personally address and resolve problems. Making sure his plant has a positive image in the community can be important for company morale. The plant manager may also be required to ensure the plant has a good reputation for respecting the environment and other local businesses.If he has to implement changes in physical operations or labor needs that affect local residents, having neighborhood support can be crucial. Public relations may also be a large part of a plant manager’s job. He often is the designated spokesperson if the media approaches him on any plant-related issues. The manager might be expected to intelligently and positively represent his plant as well as its goals and employees. If a debate ensues, he may be relied upon to persuasively argue his point of view on issues of importance to his company.Being able to objectively view company as well as community issues significantly helps a plant manager succeed. A bachelor’s degree in operations management or business administration is strongly preferred for most plant manager positions. Continuing education classes and seminars on project, plant and human resources management are often required once the job is secured. Experience in producti on, manufacturing or assembly management is considered an asset for plant manager job applicants.

Computer Industry Term Paper Example | Topics and Well Written Essays - 750 words

Computer Industry - Term Paper Example The industry has some gaps in the customer services delivery. One of the problems is due to the improvements carried out on new versions of software. Organizations are incurring costs due to the need to keep on retraining their workers to adapt to change. The developers do not take into consideration this factor and often will get complaints from the users. A case scenario is in the operating system scenario where most machines that were using windows XP are not compatible with windows seven which is the most current operating system. The software industry has also been viewed by the customers as one of the industry that increases costs incurred by companies. This has been brought about by the gap that exists between the available developers and the demand of software. The return policy varies from country to country according to the legal framework of the country. Due to the nature of the industry software can only be returned under some conditions. For instance, the software seal s hould not be tampered so that a product can be accepted back. After returning the product the customer will be refunded with amount of money used in purchasing the software. The customer must return the software to the country of purchase for this to apply. One of the things that I could implement is developing software that can allow backward compatibility of software. This will allow new software produced to be compatible with the legacy systems reducing the cost of acquiring new software on the client. Another solution would be to encourage development of software that takes environmental and working condition of customer into consideration. Software companies should know that the client wishes to enhance productivity of the employees and not completely replace them. This will eliminate the culture that has been there that software is supposed to replace or reduce workforce within the organization. The most important resources within the organization are the employees (Laurie, 20 04). The software industry major players have often denied their employees the ownership of their innovations. Companies own the copyrights of the software created by their employees. To eliminate this problem there is need to make sure that developers also form part of ownership of the software they make. Additionally, employees could be allowed to own shares within the company. This will make them feel being part of the company and will work toward improving the image of the company all the time. The company should also formulate a reward system to boost the morale and motivation. This will be used in recognizing those developers who have produced the most successful products for a certain period of time. Employee’s empowerment can be enhanced by retraining them on the most recent mode of software development. This will ensure that employees will always offer quality products to the clients which will improve the image of the company. Providing developers with the recent to ols of development can ensure that they are on the fast track and up to speed with the current technologies. The developers need to have a development environment which will ensure quick delivery while ensuring quality of the product. Customer service program Handling of complaints from customer will be carried with a lot of care and diligence. This will be done with the aim of achieving customer satisfaction. A call centre will be established which will be required to receive customers calls 24

Using adsorbing process to capture CO2 Essay Example | Topics and Well Written Essays - 3500 words

Using adsorbing process to capture CO2 - Essay Example International and domestic policies and legislation require industrial plants with significant CO2 emissions to install carbon capture and storage technologies to immobilize carbon dioxide from the input and output/flue gases (International Atomic Energy Agency, 2008). Carbon dioxide can be captured before and after the combustion of the fossil fuels. The first step is to separate CO2 from the other gases in the mixture (called flue gases) using several techniques (Figure 1). The basis of the techniques is to trap or immobilize carbon dioxide on special surfaces or by dissolution in special solvents. The immobilized CO2 is then concentrated and/or contained, followed by transport through pipelines to storage facilities, mostly deep geologic formations (Metz, Davidson, de Coninck, Loos, & Meyer, 2007). In fossil fuel plants, the most common technique used is the absorption of carbon dioxide using chemical and physical means. Other methods are adsorption on solid surfaces, use of low temperatures (cryogenics), membranes and microbial systems. Adsorption is gaining users as new innovations become available. In industrial plants, adsorption is commonly used to remove impurities from gas mixture streams as in hydrogen-rich gases resulting from gasification and steam reforming during ammonia synthesis (John Mathey Catalysts, 2010). In the adsorption process, the gas mixture is introduced or passed through a bed of solids that selectively adsorbs CO2, allowing the other gases to just pass through. When the adsorbent bed is fully saturated with CO2, the feed gas is redirected to a clean adsorption bed, while the loaded bed is regenerated to remove the CO2. This is the basic adsorption process. After the adsorbing process, the adsorbed compounds should undergo desorption, or the process of removing the compounds from the adsorbing surface. The process of desorption should also regenerate the adsorbent material. For regeneration of the

A good man is hard to find Essay Example | Topics and Well Written Essays - 500 words

A good man is hard to find - Essay Example She says, â€Å"I wouldn’t take my children in any direction with a criminal like that aloose in it† (O’Connor). Interestingly, it is the same grandmother who convinces the family to branch there on their way to since she wants to revisit a house. They unfortunately meet their untimed deaths at the hands of this Misfit. There is also something attractive in the way O’Connor describes Grandmother’s dressing. Despite her dislike of the idea of going to Florida, she is the first to get into the car wearing â€Å"a navy blue dress with a small dot in the print. Her collar and cuffs were white organdy trimmed with lace and at her neckline she had pinned a purple spray of cloth violets containing a sachet† (O’Connor). I think this dress symbolizes how a body is prepared for burial; dressed in their best attire. It is the grandmother’s reason for her glamour that removes any doubt on the coming events, â€Å"in case of an accident any one who sees her body on the highway will know that she is a lady† (O’Connor). O’Connor makes the protagonist to ignorantly speak of her coming death. The death of the whole family is also foreshadowed in the â€Å"passed by a cotton plantation with five or six graves†¦Ã¢â‚¬  (O’Connor). The numbers of the graves coincide with that of the family members, with O’Connor doubting if the baby can have its own grave or share one with its mother. Later the grandmother remembers one of her visits to an old plantation in Tennessee, neighboring â€Å"Toomsboro.† The word toomsboro brings to mind a tomb, an image that symbolizes death. The family faces the tombs at the end. Ironically, the house grandmother yearns to visit is not in the area they get a car accident. And when Wesley asks to know the plantation whose owners were buried in the five or six graves, grandmother says â€Å"gone with the wind.† This only shows what awaits the family in the end. After death, their souls will be â€Å"gone with the

Nasser speach Assignment Example | Topics and Well Written Essays - 250 words

Nasser speach - Assignment Example Even though the critics say that it did not change much in the country but it did show that the Arabs are aware. They are not merely masses that were just being sold and divided between borders and oil reserves. Even though the thoughts in Nassers narrative are appealing but nothing much has changed. One thing is for sure that the Arabs are aware, and they want to determine the destiny of their nation. Later in the documents Nassir talks about what the Arabs should do if they really want to take their fate into their hands. He says that their approach must aspire to the latest scientific tools and achievements. Embracing technology and education will be the greatest weapons in their hands. By acquiring new equipment, Egyptians industry will have its distinct position compensating for the production progress that started in other countries much earlier. He speaks of the United Arab Republic making foreign policies in the best interests of its people and not for a handful of rich Arab families. It is hard to discourage such passionate idea by Nasser, but the reality of the Middle East does not reflect his

Mobile Technology Essay Example | Topics and Well Written Essays - 500 words

Mobile Technology - Essay Example Mobile technology has not only simplified the spread of communication technology through elimination of physical medium to reach its destination but it has also added a great value to businesses through simplified and easy implementation. Mobile technology has also revolutionized the field of education, with millions of university students and educators have laptops in class rooms, university lawn and hostels directly connect to the internet and university intranet through high speed mobile wireless technologies. It is not only laptops, even mobile phones and other handheld devices are becoming exceedingly powerful enough to replace laptops and personal computer in educational and business environments. Beyond its common uses mobile technology is now stepping into new domains of ease and accessibility with research and development in the Near Field Communication (NFC) technology which is essentially a mobile technology. NFC is about to change human lives, when mobiles will be used to made flash payments through integrated debit or credit cards at trains, airports and shopping malls. The user will simply touch mobile device with the NFC tag and the payment will be made directly from user’s account. At a hospital NFC tag can collect medical history through mobile device and there will be no need to trace the hospital recodes for patient’s history. This only gives an idea about NFC because very soon NFC enabled mobile phones will carry almost every sort of information that might be used anywhere, anytime. (Kessler, 2011). Like many other modern day technologies, mobile technology is getting more and more space in human lives and has almost reached a point where it will become a necessity. Even today, its multiple uses have comforted human life so much that it has gain indomitable place in areas like businesses,

Reflection Essay Example | Topics and Well Written Essays - 500 words - 71

Reflection - Essay Example complish God’s will.† This is the actual meaning of life; that is, to attain God’s will by making the best use of your competencies that He has blessed you with. Secondly, as Johnson (1990, p.17) asserts, I would also like the world to believe that that we find the true happiness in worldly possessions, positions, wealth, and status, if only we are able to relate the acquiring of these to God’s will. For me, true happiness, which is the essence of life, comes not from worldly possessions but from obedience of God. Thirdly, my last lesson is that one should limit one’s lust for the world. One should start living according to ethical boundaries set by God, because only then will God intrude in one’s matters to shower His blessings. The German philosopher, Friedrich Nietzsche, contradicts this viewpoint with his idea of nihilism, in which he argues that human existence does not have any meaning. According to him (as cited in Keiji, 1990, p.29), t he idea of afterlife is so strong that the worldly life becomes meaningless. This idea denies the importance or the ultimate meaning of life. Still, I believe that it is important to spend this life whole-heartedly while remaining within the ethical boundaries. Sharpe and Bryant (2005, p.130) raise the concern in their book: Does the success of science mean that we must abandon the Divine like a plaything we once loved but have now outgrown? Such and other concerns raised by the authors make us ponder upon the relationship between science and religion. This course has, thus, impacted my understanding of science and religion to a great extent because I have been able to understand how science has proven what religious scriptures mentioned many hundred years ago. I have understood that science and religion do not stand far apart; instead, they strengthen each other’s claims and findings. I have understood that Diving power can never be put in the background or can never be forgotten, because it is the Divine that

An analysis on understanding of successful knowledge management Research Proposal

An analysis on understanding of successful knowledge management techniques implemented within microfinancial institutes in India - Research Proposal Example In an organisational context, knowledge management refers to the activities concerned with capturing, processing and diffusion of knowledge for the purpose of decision making and forward planning by management. The present study examines how effective is the knowledge management in an organisation to foster innovation and enhance labour productivity within the organization. Organisations have no chance of success and growth without knowledge management in the modern information-driven economy. Today organisations are trying to become more and more innovative and competitive than their rivals in regard to their knowledge gathering and dissemination. Irrespective of the type, size and nature, organisations have acknowledged the fact that knowledge management enhances the possibilities of employee learning and productivity. It has been observed by experts that learning environment is vital in modern organisations to survive and success and knowledge management gives a platform for learning opportunities and innovative thinking. It has been proved by experts (Gibbons, 1994; Nonaka et al., 1995 and 2000; and Howells, 1996) that the very basis of innovation is knowledge sharing activities. An interactive and cooperative organisational environment is very conducive for knowledge transfer and sharing that foster employee learning and productivity (Gold et al., 2001). With this background, the present study attempts to evaluate how effective is the knowledge management system in micro-financial institutions to help in employee learning and increased productivity. Despite there are endless efforts to implement knowledge management across organisations of small as well as large among both public and private organisations, little effort has been made so far to introduce the same in the micro financial institutions in India.

Locus of control and self-esteem Essay Example | Topics and Well Written Essays - 2000 words

Locus of control and self-esteem - Essay Example A drive to accomplish and maintain high self-esteem is one of the strongest motives of personality. People with high self-esteem possess a positive image about themselves while people with low self-esteem possess a negative about themselves (Baumeister, 1998). In recent times, psychologist and other social scientists have shifted emphasis on studying the personality traits of students. A number of researchers have studied the relationship between self-esteem and locus of control (Martin, 1978; Liu, Haiyan & Li, 2009). The findings of the researches suggested that locus of control and self-esteem has a negative or inverse relationship. This means that individuals having a high locus of control, that is, external locus on control will have a low self-esteem. Similarly, individuals having a low locus of control, that is, internal locus of control will have a high self-esteem (Martin, 1978; Liu, Haiyan & Li, 2009). These results are not only consistent in the academic field rather researchers investigated the relationship of the two variables among different ethnic backgrounds, socio-economic status, gender roles and discovered the same results (Goodman, Cooley, Sewell & Leavitt, 1994; Harrison, Guy & Lupfer, 1981). The main purpose of the research is to study the relationship between locus of control and self-esteem among students studying at Marshall Graduate College, Charleston. The study aims to investigate whether students having a higher locus of control have a low self-esteem and vice versa. In order to understand the two variables; locus of control and self-esteem better, the conceptual definitions are presented. The locus of control is an important concept of psychology which explains how a human perceives the events that he has gone through in his or her life. It is considered as an important part of an individual’s personality as it mainly refers to the way one perceives his/her actions and the events that his/his life passes through,

Memorial Day for Iraq and Afghanistan Essay Example for Free

Memorial Day for Iraq and Afghanistan Essay The current wars in Iraq and Afghanistan are a very big problem. Anyone will look at it as a serious peace concern. However, since any problems will also become solved in the future, it is a good thing that we have a fitting memorial when there is already peace in both countries. To memorialize the peace in Iraq and Afghanistan, there should be a dedicated date of holiday celebration. This day must be remembered as the liberating day for the people of Iraq and Afghanistan. There should be celebrations and that all people must have a break from their work and schools. It should be a national holiday for the two countries. It is also a good idea if both countries will build a monument in their capital cities. The monument should represent peace. It is very similar to the American War monument in Washington USA. Lastly, there should be a program of the Memorial Day. It means there must be parades and special public programs during the holiday event. A simple parade that will have children and youth participate so that they represent the future of peaceful nations in Iraq and Afghanistan. This will be simple but very significant. We all know that the peaceful days in our nation are very important to remember. We can have memorial days or independence days. But no matter what our plans of celebrating them, we should always memorialize the important contributions of people who sacrificed their lives for peace in our country.

Feature Driven Development Or Fdd Information Technology Essay

Feature Driven Development Or Fdd Information Technology Essay Feature driven development or FDD was further developed by Jeff De Luca to lead a software development project for a large bank in Singapore in the year 1997. The project needs to be done by 15 month and 50 employees were involved for completing the project. Another person that introduced features into the FDD development was Peter Coad. Peter Coad used object modeling and feature list as an approach to make the project meet the requirements and develop the tasks for completing the project. FDD emphasizes on starting a project by first having a detailed plan of conducting the overall process by including the main planning, object model and feature list at the starting point of the project. These items can evolved freely because each process does not affect greatly on each other. The project manager serves as the administrative leader for the project. He or she makes sure that the project operates systematically and ensures that all the participants are focused on the task. Chief Architect The chief architect holds the responsibility for designing the overall system. They also need to consider all the design issues and make critical decisions. Development Manager The role for the development manager is to handle the day to day activities in the progress of the project and ends the conflict between that happens within the team. Chief Programmer The chief programmer is usually an experienced developer. They are mainly involved in leading smaller teams for the analysis, design and development of new features. The chief programmer also needs to identify the characteristics of the feature team so that he can choose the right classes and owners that are appropriate. Sometimes the chief programmers will need to work together to solve problems such as resourcing issues and report on the progress of the team. Class Owners Class owners are responsible for the class that has been assigned to. They are under the guidance of the chief programmer. Their work responsibilities include designing, coding, testing and documenting. Domain Experts The domain experts have the probability of a user, client, a sponsor, a business analyst or a combination of the previously mentioned. The developers rely on the knowledge of the domain expert on the requirements of the undeveloped system should perform. The next other roles below are roles that does not dominate the important roles but rather acts as a supporting role and additional roles in the structure of FDD methodology. ? Domain Object Modeling The main motive of this practice is to make all the stakeholders voice out there ideas so that the project has a guideline or a road map to where it is going. The object model is a continuously updated process for rooms of correction. Developing By Feature This practice emphasize that the FDD development is done by completing each feature before moving to the next. This feature works by collecting the point of views from the client which will be evaluated and take into consideration. It can be expressed in the form of , and achieving equilibrium between these actions. This feature usually can be completed within hours or days and have a maximum 2 weeks for completing the task. Class (code) Ownership Each developer or class owner is responsible for his/her class, hence it is very important that the class owner knows what are the goals that need to be achieved and he or she must understand the characteristics and behavior of the class. This is in order that the class owner will be the first one to inform and update the class for any changes that needs to be implemented on the project so that the class can adapt much faster to the situation. There is the risk of losing a team member in the class which might be a danger to the project. Hence involvement from the class owner is very important in this practice to make sure he or she has control of the class. Feature Teams In a feature team, the owner of the feature or also known as the chief programmer works with the class owners as a team. The implementation of the feature should be done very quick and effectively. This practice also has the characteristic of flexibility when changes occur. The required class owner is just added to the feature team depending on the requirements. The feature teams are combined and then breaks up after the feature has been completed. Sometimes the feature teams works together with other feature teams and a time and an individual maybe working for a few feature teams at a time. The work of a feature team ends when their feature has been integrated to the product. Inspections This practice in FDD is to make sure that the quality and the design and code are up to standard. Besides that, there are 2 other main purpose for this practice which is to make sure the team members understands the other classes that are involved and the other purpose is to act as a forced function to maintain the consistency of the project ¿Ã‚ ½Ã‚ ¿Ã‚ ½s coding standards. Regular Build Schedule This practice is encouraged to be done often and continuously based on the need of the project. It should be a practice that is done at more than once in a week. When a new feature has been updated to the current system baseline, it can then be tested and then be documented after demonstration to the customers or the project sponsors. Configuration Management This practice in FDD is dependent on the size, scope and complexity of the project. There is no unique structure for the configuration management for the FDD development but the team must make sure that they manage their artifacts well. Reporting/Visibility of Results The FDD uses a project tracking methodology to prevent that the project is done half way before entering the next task. The feature list is referred to build the milestones that need to be achieved and some weighing factors of it. The FDD mile stones can be defined as follow: Domain walkthrough ¿Ã‚ ½Ã‚ ¿Ã‚ ½complete; Design ¿Ã‚ ½Ã‚ ¿Ã‚ ½ready for inspection; Design inspection ¿Ã‚ ½Ã‚ ¿Ã‚ ½and any rework and reinspection complete; Code ¿Ã‚ ½Ã‚ ¿Ã‚ ½ready for inspection; Code inspection ¿Ã‚ ½Ã‚ ¿Ã‚ ½and any rework and reinspection complete; Promote to build ¿Ã‚ ½Ã‚ ¿Ã‚ ½all feature code checked in and ready for the next build; The weight for each milestone uses a simple computation method. It is simply the time required for that feature to be completed divide by the overall time needed to complete the overall feature. For example, if the design walkthrough requires 5% of their time to complete, then the weight for the milestone is to be 0.05(5% divide by 100). For computing the project status, it is the total milestones that have been completed divide by the number of features. For example, the current completed milestones are 183 in weight and the features are 200. Then the completion of the project is: Project status =(sum of currently completed milestones)/(the total number feature in the product) ¿Ã‚ ½Ã‚ ¿Ã‚ ½100% = 183/200 ¿Ã‚ ½Ã‚ ¿Ã‚ ½100% = 91.5% Advantages and Disadvantages of the Feature Driven Development Advantages Disadvantages It is better defined and measured by its 8 practices rather then the process flow. Create efficiency of individuals at making changes to a class The lost of the individual will bring a negative effect on the feature team. Owns the dynamic and flexible characteristics at adding required owners to a feature team. Lack emphasis on the configuration management. Should be a more detailed structure. Inspections are emphasized to ensure quality of design and codings. Sets milestones and ensures that the feature is done before continuing the next. Discussions: The feature driven development requires the owner of each class is fully involved in the feature and take responsibility for his or her class. Motivation is instill to the owner to work efficiently. The overall assumption from the stakeholders is very important to develop the object model of the project. The features must be first identified to make the project flow more smoothly. The milestones make sure that the previous progress is done before moving on to the next. This step is smart to prevent continuous work an unfinished task. Conclusion: The feature driven development provides good flexibility when a feature needs to be developed. Class owners are able to combine and disband based on the needs when developing the feature makes this methodology a very dynamic characteristic.

Inserted-Plate Coated of Methanol Steam Reformer

Inserted-Plate Coated of Methanol Steam Reformer High Efficiency Inserted-Plate Coated of Methanol Steam Reformer: PEM Fuel Cell Applications Methanol can be easily stored and transported and converted to H2 using a reforming reactor that makes it an excellent hydrogen and energy source for fuel cell applicationsEasily storage, transporting and converting to H2 by a reforming reactor using makes it an excellent energy source for PEMFC applications [1-3] During the last decades, there has been a growing interest on developing technologies taking advantage of clean energy sources. The reduction of atmospheric pollution and, namely, the emission of greenhouse gases have become imperative and, among the new technologies for mitigating these emissions, fuel cells have the ability to efficiently convert chemical into electrical energy. In particular, PEMFCs are zero-pollutants emission systems because they transform the chemical energy of the electrochemical reaction within hydrogen and oxygen into clean electrical powerTodays, for environmental issues, growing interest on developing technologies including clean energy sources has been focused. Pollution issue and, especially, the emission of greenhouse gases have become crucial and, the new technology for elimination of these emission, can be achieved by PEMFC. [4, 5] Meanwhile, compared to other feedstocks, methanol exploitation shows various advantages as a hydrogen carrier for fuel cell applications and, namely, it can be produced from renewable sources[9], and the reforming reaction occurs at relatively low temperatures, ca. 240–260 1CAmong these, methanol exploitation leads various advantages as a hydrogen carrier and, especially, reforming reaction applying at relatively low temperature (240-260 C) [6] , compared to the methane reforming, normally performed at 800–1000 1C, compared to the methane reforming, normally carry out at 800-1000 C[7] . Methanol steam reforming (MSR) reaction has been seen as a very attractive and promising process for hydrogen production and, according to the scientific literature on the argument, it can be described by the following chemical reactions:Attractive and promising of the methanol steam reforming process cause especial insight to this reaction which according to the scientific references, occurs by the following chemical reactions: Where reactions 1, 2 and 3 represent MSR reaction, water gas shift reaction and methanol decomposition reaction, respectively.Reaction (1), represents MSR reaction, reaction (2) represents water gas shift reaction and reaction (3) represents the methanol decomposition reaction The reactor design has direct impact on the reaction conversion, but owing to higher technical complexity and manufacturing costs of other designs, the reformers and MRs are normally tubular. However, recent efforts in the area of micro-processing made possible and easier to manufacture other reactor designs and namely well-structured à ¯Ã‚ ¬Ã¢â‚¬Å¡at micro-reactors. A micro-reactor is defined as a device that contains micro structured features, with a sub-millimeter dimension, in which chemical reactions are performed in a continuous manner They present advantages compared to conventional ones such as higher surface-to-volume ratio, smaller mean distance of the specific à ¯Ã‚ ¬Ã¢â‚¬Å¡uid volume to the reactor walls, better heat and matter transfer properties and à ¯Ã‚ ¬Ã¢â‚¬Å¡ow patterns that fit with the reaction needs. Furthermore, à ¯Ã‚ ¬Ã¢â‚¬Å¡at reformers are suitable for stack integration with fuel cells. Packed-bed micro-reactors require well-define catalyst particles, wi th regular shape and much smaller than the internal dimensions of the micro-channels, which is a problem for most of commercial catalysts.The reactor design, directly impress reaction conversion but owning to higher complexity and fabrication costs should be considered. Common normally MRs are in tubular shape. However, recent researches show easier to manufacture and possibility of other designs and namely well-structured flat micro-reactors. A reactor containing micro structure features and sub-millimeter dimension through performing in a continues manner representing advantages such as higher surface to volume ratio, smaller mean distance of the specific fluid volume to the reactor walls, improving heat and mass transfer make appropriate situation of stack integration with fuel cells. [8]. Many studies have been developed to explore the advantages of micro/mini-reactors to produce hydrogen through MSR The design of a reactor targets the maximization of the conversion and selectivity at the lowest costs and its performance is inà ¯Ã‚ ¬Ã¢â‚¬Å¡uenced by the à ¯Ã‚ ¬Ã¢â‚¬Å¡ow pattern, velocity profile, pressure drop and heat transfer, so all these aspects must be consideredTo fabricate an effective micro-reactor having maximum conversion and selectivity at a low cost is impressed by the flow pattern, velocity profile, pressure drop and heat transfer, therefore all these approaches should be considered[9]. For conducting MSR reaction, most of the used reactor designs are rectilinear channels, pin-hole, coil-based and radial (Fig. 2).Coil-based reactor designs allow high conversions, but impose a significant pressure drop penalty, which may be a limitation for compact applications Categorization of the design consist rectilinear channels, pin-hole, coil-based and radial (Fi g. 2). Among these, Coil based leads high conversion and pressure drop preventing compact applications[9]. In the other hand, the rectilinear channel designs exhibit a small-pressure drop, but the conversion is low due to uneven mass distribution and is affected by the Reynolds number while, the first exhibit a small pressure drop, uneven mass distribution cause lower conversion which impressed by Reynolds number[9]. Yet, by adjusting the channels width [69] or by imposing a pressure drop at the channels entrance even distributions on rectilinear channel designs can be obtained, improving the methanol conversion[10]. Conventional packed-bed reactor has disadvantages, such as hot spots, delays in start-up, and mass and heat transfer limitations. For micro-scale reactor, the pressure drop is somewhat higher due to space constraints of channels being blocked with catalysts. A micro-pump used in portable applications may not be capable of overcoming a high pressure drop. On the other hand, microchannel reactor offers advantages, such as fast heating and cooling, large surface-area-to volume ratios, and less energy input The packed-bed reactors as a classic system, have disadvantages, such as hot spot, slow start-up, and heat and mass transfer limitations. Micro-structure scale of this group utilizing a micro pump is necessary, due to high pressure and channel blockage [10]. Some research has shown that wall-coated reactor performs better than packed bed reactor for SRM reaction various researches has proofed better performance of the wall-coated than packed bed reactor for SRM reaction[11, 12]. Experimental Catalyst preparation Firstly, 200 ml deionized water was heated to 80ËÅ ¡C and then metal nitrates of Cu, Zn and Fe (to prepare CuZnFe) were dissolved into the water until get the 0.2M solution. This solution was added to the heated water (80ËÅ ¡C) over stirrer under 350 rpm. To control and adjust pH around 7, the precipitation agent of 0.5M Na2CO3 was used. The obtained precipitates were aged at 60 ËÅ ¡C for 2 h under vigorous stirring. Afterward, the solids were filtered and washed with warm deionized water for several times and dried at 110 ËÅ ¡C for 12 h. then, the dried powder was calcined in a furnace at 350 ËÅ ¡C for 4h. Catalyst slurry preparation PVA (87-90% hydrolyzed, average mol wt 30,000-70,000,SIGMA-ALDRICH) was added to deionized water first, and stirred at 70 C until totally dissolved, then cooled at room temperature. As-synthesized, high-performance CuZnFe catalyst (10 wt.% catalyst) was added into the PVA solution (0.5 wt.%, 1 wt.%, 2 wt.% PVA) as-prepared. The catalyst slurry was kept in the ultrasonic bath for 1 h. Catalyst coating by electrophoretic deposition on stainless steel plates To prepare a regular, controlled catalytic layer, a well-stable suspensions of the catalyst powder are necessary which depend on the particle size, solvent characteristics and additional agents. To do this, the powder were milled to get a uniformity of particle size distribution below 40 micron, at least. Isopropanol was selected as solvent due to lower conductivity limiting solvent transportation than of the aqueous ones. Moreover, presence of aqueous base cause water electrolysis following poor coverage of catalyst. Electrophoretic deposition was performed at constant voltage (140 V) using a power supply unit (SPS-900NP-Navasanpardaz). The stainless steel (AISI-304) palates (7.04 cm2) were used as electrodes in the EPD bath. To cover both sides of the plate, a system including three electrodes was selected which, were mounted at a distance of 15 mm in a cell with a total volume of 120 ml. slurry of 72 g/L of catalyst in isopropanol and 1 g/L of PEI as binder was prepared through 15 min strongly stirring and then, 15 min signification in an ultrasonic bath (1200M-Soltec). The time of 4 min as coating time was fixed for all samples. After coating, the plates were dried in room temperature and then calcination at 350 C for 2 h. Method and materials According to the procedure in fig. 1, a series of CuZnFe slurries and samples were prepared. The synthesized powder was milled at 250 rpm for 10 min (due to initial fine powder structure short milling time was chosen) by a milling apparatus. It make a stable behavior of the slurry and homogenous final layer deposited. Results and Discussion After the coating procedure, the changing structure of the CuZnFe catalyst, the operating parameters and micro-channel characterization affect the efficiency of hydrogen in the output. In this study, explored a number of vital parameters characterization, including channeling arrangement and shape, coating methods and the efficiency of hydrogen production. Micro-Channeling Theory Design and micro-channel arrangement optimization cause select an appropriate structure limited by performance efficiency, constant cost like startup, Fabrication, and variable costs (Catalyst stability, coated layer quality, appropriate life time). Regardless of the constant costs, overall state and changing catalytic plates while the plates have been channelized, replacement and re-channelizing, coating procedure should be more difficult. Although, chein et. Al. [13] adopt three types reformer including the microchannel, the plain channel and the inserted catalyst layer while utilizing channeling over cover plate is different. All proposed structure of a square microchannel have been shown below†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦. In this research, flexibility and replacing of an aged micro-reformer has been emphasized, an appropriate configuration with the minimum of fabrication cost through a recoverable coating procedure, minimum catalyst consuming and high efficiency has been adopted. A treated stainless steel as active layer was coated by the high efficiency CuZnFe catalyst which coated in an electrophoretic bath under a high controlling ability condition. The EPD producer will be discussed elsewhere, in detail. According to the optimum condition of a constant parameters, type of micro-channels, length and stability have been investigated. Reactor design The reactors were designed as flat-plate composed of stainless steel 304 plates. The microstructures were introduced by CNC technology. The both cover plate were machined to cover the active catalytic layer and increasing area to volume concept. The active layers were coated by home-made synthesized high efficiency steam reforming catalyst. Subsequently, the housing sealed by graphite gasket and bolts. The size and number of channels are summarized in table 1. Table 1.  Summary of the dimensions of the reactor: the channel dimensions are only provided for the reformate side of the plates Parallel channel Zig-zag channel Length(mm) Wide(mm) Depth(mm) Length(mm) Wide(mm) Depth(mm) The test plates and reformer design details are shown in fig. 1. On the top side of the cover plate, as shown in fig. 1(a), microchannel were patterned zig-zag path to reduce pressure drop along the path, holding high activity of the catalyst through the contact time increasing.(ref) the feed methanol-water mixture is sent to the vaporizer section including an inert alumina granule packed developing the heat transfer, and then, collected in an triangle manifold in the reformer inlet to obtain a more uniformly distributed flow. The design of the reformer channel (as shown in fig) leads splitting-jointing in an alternatively manner. In order to identify the reactant flow pattern effect on the reforming performance, the reformer channels shown in fig.1 were investigated. Catalyst coating The results of coating procedure, have been shown in fig 2. For all the plates, the same catalyst loading of 25mg was coated. Experimental setup A schematic diagram of the experimental setup is shown in fig. 3. The main components of the system are reactants, micro-reformer and products. To provide the heat of the reaction an electrical furnace was used controlled by a TIC. The feedstock system including methanol-water in liquid phase was sent by a syringe pump (model nnn) in a designed feed composition and determined S/C= 1.3 in all the tests. The reformed gas stream was then sent to a cold trap to eliminate the unreacted liquid phase. In continues, the rest of the gases was conducted to a gas chromatography equipped via two columns of carboxen and hysep Q (model shimadzu GC-8A). Based on the achieved fractions and compositions, the methanol conversion, CO selectivity, hydrogen yield and stability of the active layer cab be achieved. A K-type thermocouple connected at the end of the holes which designed to measure temperature of determined spots along the axis, default of the measurement is based on the central point of the reformer for all the tests. Results and Discussion 50 mm parallel microchannel Fig. 4 and fig. 5 display the performance of the microchannels according to the length. The investigation was performed under different temperature and micro channel types. It can be observed that the methanol conversion rates with various lengths is no different although the magnitude of this depends on the micro channel arrangement and for the direct parallel channels is more obvious. In the experiments, the effect of reaction temperature could overcome length and full conversion of methanol was achieved, finally. For the zig zag type, by variation in length in a range of 20 to 50 mm, no difference was observed. The arrangement cause more efficiency in reduction of surface to volume ratio. Actually the need of a sufficient contact time of the reactants on the catalytic active sites is necessary for a satisfying conversion. In the zag-zag type the contact time will increased and the at least of the sufficient length of full conversion is about 25mm. other lengths below those was not possible due to the limitation of the mass flow controller. On the other hand, being endothermic of MSR, the least requirement heat of reaction can be supplied by increasing of the contact time on the cover plate which is contacted to the heating source, consequently following the micro channel length. About the CO content, however, due to being full conversion in considered lengths, there is no significant different among the cases. Higher conversion can cause producing some more CO in the outlet. On the other hand, sufficient existing catalyst affect the CO production due to being active rWGS in lower loading of the catalyst. (ref). Zig-Zag microchannel Felani et al. [ ] proposed that a novel channel arrangement with a certain sizing could guarantee better flow distribution, higher contact time being accessible of reaction and heating, and lower pressure drop than those of conventional ones. The proposed model can increase the methanol conversion. Fig. 6 shows the illustration of the micro-reactor with such zig-zag microchannel. The performances of parallel microchannels and that of zig-zag microchannels are compared by the present experiment. The micro-reactor in this study is different from that of chein et al. [13]. In chein’s paper, the reactor only has simple inserted plate without channelizing. It is noticed that in this experiment novel catalyst of CuZnFe has been used and the goal of this experiment is not the comparison of the cases. Advantages of easily replacing, lower costs of recoating and flexibility managing of the fuel processor. Fig. 7 shows the variation of the methanol conversion with the temperatures. It c an be found that with the increase of the temperature, the methanol conversion decrease. The conversion in zig-zag microchannels were higher than those in parallel microchannels. When the temperature is high, methanol conversion in zig-zag microchannels could be 20% higher than that in parallel microchannels. As mentioned before, zig-zag microchannels induce potential of providing more contact time to react under the help of catalysts, thereby enhancing the methanol conversion. Conclusions In this paper, the experiment of methanol steam reforming were performed in a micro-reformer coated with novel CuZnFe catalyst. The following conclusion can be achieved. 1. The impacts of reaction temperature, gas hourly space velocity, H2O-to-CH3OH molar ratio and catalyst stability were also investigated in this stainless micro-reformer. Condition selection of optimum operation can be achieved by these useful guidance. 2. Micro-reactor with two types microchannel arrangement, including zig-zag path and parallel microchannels, different lengths of 15, 30 and 60 mm were evaluated. It is found that methanol conversion in microchannels with zig-zag path are much higher than that of parallel path. In addition, since zig-zag path cause more contact time of the reactants on active sites of catalyst, there is no different of methanol conversion with length variation, while in the parallel path, it was obvious that higher length leads to more methanol conversion. References [1] D.R. Palo, R.A. Dagle, J.D. Holladay, Chemical Reviews 107 (2007) 3992-4021. [2] L. F Brown, International Journal of Hydrogen Energy 26 (2001) 381-397. [3] C. Liao, P.A. Erickson, International Journal of Hydrogen Energy 33 (2008) 1652-1660. [4] J.-H. Wee, Renewable and sustainable energy reviews 11 (2007) 1720-1738. [5] S. Bose, T. Kuila, T.X.H. Nguyen, N.H. Kim, K.-t. Lau, J.H. Lee, Progress in Polymer Science 36 (2011) 813-843. [6] R.Y. Chein, Y.C. Chen, Y.S. Lin, J. Chung, International Journal of Energy Research 36 (2012) 466-476. [7] A. Basile, A. Iulianelli, T. Longo, S. Liguori, M. De Falco, Membrane Reactors for Hydrogen Production Processes, Springer, 2011, pp. 21-55. [8] V. Hessel, S. Hardt, H. Là ¶we, Chemical micro process engineering: fundamentals, modelling and reactions, John Wiley Sons, 2006. [9] H. An, A. Li, A.P. Sasmito, J.C. Kurnia, S.V. Jangam, A.S. Mujumdar, Chemical Engineering Science 75 (2012) 85-95. [10] X. Ouyang, L. Bednarova, R. Besser, P. Ho, AIChE journal 51 (2005) 1758-1772. [11] A. Karim, J. Bravo, D. Gorm, T. Conant, A. Datye, Catalysis today 110 (2005) 86-91. [12] J. Bravo, A. Karim, T. Conant, G.P. Lopez, A. Datye, Chemical Engineering Journal 101 (2004) 113-121. [13] R.-Y. Chein, Y.-C. Chen, Y.-S. Lin, J. Chung, International Journal of Thermal Sciences 50 (2011) 1253-1262.

Gothic Elements in A Curtain of Green and Death of a Traveling Salesma

Gothic Elements in A Curtain of Green and Death of a Traveling Salesman In fiction, Gothicism is defined as a style that emphasizes the grotesque, mysterious, and desolate. Eudora Welty makes frequent use of the grotesque in her work, often pairing it with elements of mystery, as in "Keela, The Outcast Indian Maiden." However, she usually deals with desolation as a separate element, as in "Death of A Traveling Salesman," in which the focus is placed on the lonely, fruitless existence of R.J. Bowman. One early reviewer of A Curtain of Green, in which "Keela, The Outcast Indian Maiden" appears, wrote that Welty was "preoccupied with the demented, the deformed, the queer, [and] the highly spiced" (Vande Kieft 67). Though the presence of these elements is pronounced, the reviewer has failed to look past these devices to see Welty's purpose. Welty's focus is never centered around the grotesque itself; rather she focuses on her characters' reactions to it and the contrast it creates. "She does not try mystically to transform or anonymously to interpret," she me...

Agatha Christie :: essays research papers

Agatha Christie: Queen of the Mystery Genre Agatha Mary Clarissa Miller was born to Mr. and Mrs. Fred Miller of Torquay, Devon, England. Researchers debate on the year in which she was born, but it was September 15 in either 1890 or 1891. Her father was an American who lived with his British wife in Torquay. At the time, her parents did not realize that their daughter would one day become a famous English author, writing an insatiable amount of novels and plays. Her focus was mainly on the mystery genre of literature. She was married two times, and bore one daughter by her first husband. In 1971, five years before her death, Christie was given the prestigious title of a Dame Commander of the Order of the British Empire. She died January 12, 1976 at Wallingford in Oxfordshire (Prichard www.mysteries.com/birthday/). Agatha Miller was born the third child to her parents, Fred and Mary Miller. She grew up in Torquay, Devon, England. She was taught at home by her mother and several tutors and governesses, never attending a real sch ool. As a child, Miller kept herself occupied by inventing games to play with her siblings. Not being around other children besides her siblings made Miller a shy child. She was not outspoken in her thoughts, so she expressed her feelings in music. Later in life, she would turn to writing as a means of expression (Yaffe BKYaffe@nltl.columbia.edu). Agatha Miller’s first husband was Archibald Christie, who was a World War I fighter pilot. The newlywed Mrs. Christie worked as a nurse while her husband was off at war. Through her nursing experiences, she learned of many new drugs on the market. These drugs fascinated her, thus prompting her to use them as factors in several of her Graham 2 works. Her marriage to Christie lasted only twelve years, and they were divorced in 1926. Not long after her divorce from her first husband, Christie disappeared without a trace for a short period of ten days. She was found at a resort hotel, claiming to be a victim of amnesia caused by emotion al stress. Agatha Christie had checked into the hotel under the alias Theresa Neele; Neele being the surname of her husband’s mistress. After a full memory recovery, Christie claimed for the rest of her life that she truly suffered amnesia. Some critics say that Christie faked her amnesia to do two things. Agatha Christie :: essays research papers Agatha Christie: Queen of the Mystery Genre Agatha Mary Clarissa Miller was born to Mr. and Mrs. Fred Miller of Torquay, Devon, England. Researchers debate on the year in which she was born, but it was September 15 in either 1890 or 1891. Her father was an American who lived with his British wife in Torquay. At the time, her parents did not realize that their daughter would one day become a famous English author, writing an insatiable amount of novels and plays. Her focus was mainly on the mystery genre of literature. She was married two times, and bore one daughter by her first husband. In 1971, five years before her death, Christie was given the prestigious title of a Dame Commander of the Order of the British Empire. She died January 12, 1976 at Wallingford in Oxfordshire (Prichard www.mysteries.com/birthday/). Agatha Miller was born the third child to her parents, Fred and Mary Miller. She grew up in Torquay, Devon, England. She was taught at home by her mother and several tutors and governesses, never attending a real sch ool. As a child, Miller kept herself occupied by inventing games to play with her siblings. Not being around other children besides her siblings made Miller a shy child. She was not outspoken in her thoughts, so she expressed her feelings in music. Later in life, she would turn to writing as a means of expression (Yaffe BKYaffe@nltl.columbia.edu). Agatha Miller’s first husband was Archibald Christie, who was a World War I fighter pilot. The newlywed Mrs. Christie worked as a nurse while her husband was off at war. Through her nursing experiences, she learned of many new drugs on the market. These drugs fascinated her, thus prompting her to use them as factors in several of her Graham 2 works. Her marriage to Christie lasted only twelve years, and they were divorced in 1926. Not long after her divorce from her first husband, Christie disappeared without a trace for a short period of ten days. She was found at a resort hotel, claiming to be a victim of amnesia caused by emotion al stress. Agatha Christie had checked into the hotel under the alias Theresa Neele; Neele being the surname of her husband’s mistress. After a full memory recovery, Christie claimed for the rest of her life that she truly suffered amnesia. Some critics say that Christie faked her amnesia to do two things.

Article Review Gill, Valerie Essay

In the article â€Å"Catharine Beecher and Charlotte Perkins Gilman: Architects of Female Power† by author Valerie Gill, Ms. Gill attempts to bridge the gap between what appears to be two powerful women of their time with two totally different opinions of the American woman and the type of life they should lead. The author points out the obvious differences of opinions in the writings of the two women, who are related by the way, and the different era in which they write. Catharine Beecher was the great aunt of Charlotte Perkins Gilman and lived and wrote during a time when  a woman working in any other place besides the home was not something that happened often. A woman’s job during this time was to raise children and make the home a warm, inviting space that had functionality that would allow for â€Å"separate spheres† for the men and women, allowing the men to have a place to discuss outside ventures and women to have a place to deal with domestic matters. Charlotte Perkins Gilman on the other hand, lived during a period where productivity was happening in factories all over the country. Her feminist attempt to undo her  great aunt’s idea that women should be assigned to only the home made it appear that the two women had absolutely nothing in common when it came to the ideas on how women should be viewed socially. Gill points out how the two very different opinions actually have many things in common. Both women agree that the role of women is very important to the health of society, even though they disagree on what their roles should be. By suggesting that each writer knows what is the best arrangement for women to experience shows another similarity between the two writers. As  pointed out by Gill, â€Å"Both writers conceptualize the identity of women in spatial as well as socioeconomic terms, assuming that the fulfillment of their own sex can be quite literally mapped out†. The author makes a point that even though their opinions of what is ideal are very different, the idea that there is one way to make women live a full life is exactly the same. Both women also had the common conclusion that the woman’s place, whether it is in the home working or in the factory working, would make a great impact on the society. Architectural ideas as to better society are another thing these two authors had in common, as  pointed out by Gill in the article. The elder author Beecher would make drawings in her articles about staging the home and using dividers as a way to make more areas in the home, and Gilman, being concerned about the lives led by farmer’s wives, included drawings of a farming community shaped like a pie that had common areas to share, as to make life easier for them. Interesting enough, Gill included in her article a picture of a drawing done by Beecher, along with her sister Harriet Beecher Stowe, later in life of a block of houses with common areas used  to house the â€Å"homeless, helpless, and vicious† which very much resembled Gilman’s block community idea where people shared common spaces and so that some women could take care of the children and household duties while others went out in the community to work. This is an excellent example of Beecher thinking like Gilman in the mixing of public and private space. It is my opinion that the aging Beecher was beginning to think out of the box. This article was insightful and gave a great example of how people with a difference of opinion can actually be thinking the same. If one just read the two women’s writings without an open mind, one would think they were completely different and had totally different ideas. Valerie Gill allowed the reader of the article to view a situation such as this one in a different way and to keep an open mind and read between the lines of any writings. I would have liked to have seen her go on and discuss the idea that some women may belong at home and some may belong in the workforce. I believe that every woman has a different situation to consider and what is important to one woman may not be important to another.

The Effects of Price Control In Japan

If supply is greater than demand, the price of a product will decrease. If demand is greater than supply, the price of a product will increase. This is a simple rule that determines the price of almost all consumer goods. But what happens if the price is too high. What happens if there is a massive shortage or if a war breaks out and the price of everyday products such as sugar or bread skyrockets. Who will protect the consumer? And vice versa, who will protect the seller. This is where the government steps in and imposes price controls. Price controls are imposed to help or protect particular parts of the population which would be treated unequally by the unfettered price system. With today's technology, many farmers around the world find themselves producing far more than they can sell or a surplus and this drives down prices. Therefore to support the farmers, many governments have created price floors to increase the income of their farmers who without them would fail to make a living profit. Japanese agricultural policy so far has focused on maintaining agricultural income by price controls. During the 1960s, Japan was in a stage of extraordinarily rapid growth. But Japanese farmers still produced more crops, namely rice, then they could sell, and this drove prices down and dwindled their profits. All the while, the industrial sector began creating massive profits. As a result, the income gap between the two was widening. Politicians knew that social and political unrest would result if the situation worsened. And so they began to resort to price controls to protect agriculture. To increase the farmers' income, the government placed price floors or price supports on rice and other crops. Therefore, the price of rice would not be determined by the free market but by this set price. The Japanese government set the price floor higher than the equilibrium price or the price of rice in the free market. By doing this they were sure to increase the income of farmers. But this policy had its drawbacks. The price policy impaired the basic market mechanisms. The increased price drew away buyers, resulting in an excessive surplus of rice. In fact, rice surplus amounted to approximately seven million tons in storage, and that required three trillion yen of tax money for its disposal. Although this policy helped farmers, it became a great strain on the government and taxpayers. The Japanese government began to implement a new policy. The only way to avoid surplus under such a high price policy is to limit production. Hence, a policy to cut back on rice acreage was introduced. But this policy also ran into problems. Reduced production was forced onto the producers and served only to dampen their motivation to produce and to hinder their drive. Another hindrance in price control is a segregated overseas and domestic market. The only way for the government to retain this kind of price policy and maintain agricultural income is by closing off its borders form imports. With this price control the government ran into many problems. It therefore abolished the Food Staple Control Act which implemented this price policy and replaced it with the New Food Staple Control Act in November 1995. This new act liberated distribution and limited the government's role to just the purchase and management of rice reserves. In conclusion, Japan's price control policy was created with the best intentions to improve agriculture income. While it succeeded in that aspect, the government and its people were hurt more by this policy. Even the farmers themselves who had their production limited became unmotivated. We see from this case scenario that sometimes the government needs to take a step back and play a limited role in the economy or practice laissez-faire economics.

The Chrysalids: A Science Fiction Novel

â€Å"It's often said that Science Fiction is the literature of change. † (Treitel). When a society is going through a period in which they develop many new technologies, science fiction stories often emerge. The feelings and fears of that society are expressed in science fiction. The Chrysalids, a science fiction novel, incorporates characteristics of its genre by being set in a different world, by relating to current events and by showing how destructive power can be. Setting plays a prominent role in defining a science fiction story. Science fiction texts are often set in the future, in space, on a different world, or in a different universe or dimension. † (â€Å"Definition†). John Wyndham's novel, The Chrysalids, is set centuries in the future. â€Å"But, Uncle, if we don't try to be like the Old People and rebuild the things that have been lost, what can we do? † (Wyndham 79). The word science fiction brings to mind futuristic worlds full of whirring machines and shiny metals. This novel takes an alternate approach; it shows a world so devastated by nuclear war that it has actually regressed, and yet it is still a possible future. In addition to being set in the future, this novel shows a changed Earth. â€Å"†¦ An Offense was sometimes quite an impressive occasion†¦ My father†¦ would call us all together, including everyone who worked on the farm. We would all kneel while he proclaimed our repentance and led prayers for forgiveness. The next morning we would all be up before daylight and gather in the yard. As the sun rose we would sing a hymn while my father ceremonially slaughtered the two-headed calf, four-legged chicken, or whatever kind of Offense it happened to be. † (Wyndham 18). The world John Wyndham has created is so different from the current reality, it is almost a separate entity. In the fictional reality, the people are terrified of anything different from what they perceive to be the norm. They kill, burn or cast out anything considered to be a deviation. This setting allows the writer to explore terrifying concepts with distance while still creating parallels with current societies. Setting is a vital part of any science fiction story. Furthermore, science fiction relates to current events. â€Å"Good [science fiction]†¦ can provide us with fascinating thought experiments to while way the hours, or extrapolate future dystopias from the politics of the present; it can generate visions of tomorrow's world, or of worlds eons hence; it can warn or it can soothe†¦ † (Clute 6). The Chrysalids explores the impact of nuclear weapons. â€Å"The whole seaboard is empty – black and harsh and empty. The land looks like a huge desert of c harcoal. Where there are cliffs they are sharp-edged, with nothing to soften them. There are no fish in the sea there, no weed either, not even slime, and when a ship has sailed there the barnacles and the fouling on her bottom drop off, and leave her hull clean. You don't see any birds. Nothing moves at all, except the waves breaking on the black beaches. † (Wyndham 60). This novel was first published in 1955, shortly after World War II and at a time when many people were protesting the use of nuclear bombs. People saw the destruction these weapons were capable of and they were afraid. The Chrysalids is a response to that fear; it shows one possible future. Propaganda is another issue discussed in The Chrysalids. â€Å"Not ashamed! Not ashamed of producing a mockery of your Maker – not ashamed of trying to tempt your own sister into criminal conspiracy! The enemies of God besiege us. They seek to strike at Him through us. Unendingly they work to distort the true image; through our weaker vessels they attempt to defile the race. You have sinned, woman†¦ You have produced a defilement†¦ A baby which, if you were to have your way, would grow up to breed, and, breeding, spread pollution until all around us there would be mutants and abominations. † (Wyndham 72). In 1955, the Cold War was in full swing. Spies and secrets abounded while children were told that the other side is evil and propaganda slowly poisoned their minds. Eventually, they believe the lies. Joseph Strorm truly believes what he is saying; he feels that his sister-in-law should kill her newborn child, rather than let it grow and eventually have children of its own. Science fiction often incorporates concerns of the author and the general public at that time. Additionally, science fiction often involves the misuse of power. â€Å"[Science fiction] suggests the possibility of scientific discovery going too far, taking on a God-like power that leads to disaster. † (Quinn) In The Chrysalids there are two examples of destructive power. Firstly, there is nuclear power. â€Å"This is a dreadful country indeed†¦ There are stretches, miles across, where it looks as if all the ground has been fused into black glass; there is nothing else†¦ It goes on and on†¦ What did they do here? What can they have done to create such a frightful place?†¦ It must be utterly beyond hope, barred to any kind of life for ever and ever†¦ There was the power of gods in the hands of children, we know: but were they mad children, all of them quite mad?†¦ The mountains are cinders and the plains are black glass – still, after centuries! † (Wyndham 179). Power is a dangerous thing, as evidenced by the burned mountains and plains of glass discussed in this novel. Power is a popular topic for science fiction stories because so many people crave it, despite its poor history and bleak future. The Chrysalids looks at the consequences of nuclear warfare and the idea that this kind of power is not meant for human hands. The second type of power explored in The Chrysalids, is the power of conformity. â€Å"According to Ethics, mankind†¦ was in the process of climbing back into grace; we were following a faint and difficult trail which led up to the peaks from which we had fallen†¦ There was only one true trail, and by following it we should, with God's help and in His own good time, regain all that had been lost†¦ Only the authorities, ecclesiastical and lay, were in a position to judge whether the next step was a rediscovery, and so, safe to take; or whether it deviated from the true re-ascent, and so was sinful. † (Wyndham 40). As a race attempting to rebuild its society, conformity and a deference to authority figures would have been beneficial. However, change is necessary for growth. Having a world full of people like Joseph Strorm, who fear change as a deviation from the true path, will bring about the destruction of that society. In The Chrysalids, authority figures force everyone to conform to their idea of what is right and what is sinful. This kind of power is dangerous and, at the end of book, brings about the death of Joseph Strorm and many like him. Destructive power is a popular theme in science fiction novels. Due to its setting, relation to reality and demonstration of various destructive powers, The Chrysalids is clearly a science fiction novel. Science fiction can be many things; it can be educational, providing lessons and morals that apply to real life scenarios; it can be a warning, showing the readers a possible or a probable fate; or it can simply take the reader on a fantastic journey, flying through space and time. Above all science fiction is about change. â€Å"Life is change, that is how it differs from the rocks, change is its very nature. † (Wyndham 182). The Chrysalids, and science fiction in general, teaches that nothing in life is static.

Exit Through the Gift Shop

Banksy is the pseudonym of a British graffiti artist and painter. Although the street's artist are usually anonymous, Banksy may be one of the most mysterious street's artists. Banksy, who has been acting for over ten years But recently his name has been known and because of his type of activity and protest is popular in media and public. Banksy's first film was showed in the Sundance Film Festival 2010 for the first time. The film was released in the England in March 2010 And in January 2011 was nominated for the Academy Award for the Best Documentary film. The film is composed of two parts. One part is an interview with Banksy and the other part is the films that Thierry Guetta has recorded with his camera. Terry is a Frenchman who lived in Los Angeles and has spent his life with fashion's fans. Terry has a unique feature, he doesn't go anywhere without his camera As he describes it as an addiction. Finally on a trip to France in 1999 a new event occurs. Terry was fortunate to being in a right place. He met street's artist and was started filming. Street's artist liked it too because in this way they were able to develope their art. After ten months of filming street's artists finally, an idea comes to Terry's mind, Documentation. The only thing that Terry was needed in his film was Banksy's presence. Banky is working and Terry videos. Banksy seggested Terry to make a documentry with these videos. After 6 months Terry come back with a film but Banksy did not like the film that Terry was made. â€Å"Exit through the gift shop† is a sotry of a character that Banksy made it. The interplay of the devices used to record and that which is being recorded include:  ·Form Use of natural properties of the medium  ·Cinematography In this documentry film Terry's Camera acts as a recording device and does not comment upon the action.  ·Screenplay Terry did not plan for the dialogues, they are natural and unscripted.  ·Mise-en-Scene There is no specific costumes, make-up and actrors in this film. Every thing is natural.  ·Edditing Aids in comprehension through cutting out all unnecessary action. Exit Through the Gift Shop Creativity has always pushed the limits in the media and societal culture. In modern society, street art is considered as vandalism, in comparison to the artist(s) and works shown in the film â€Å"Exit Through the Gift Shop†, street art is a life-style. It helps the artist convey thoughts and opinions, while abusing the right of staying anonymous. Exit Through the Gift Shop removes that anonymity for every artist, aside from one, Banksy, the filmmaker. Banksy is a notorious street artist that prefers to push the limits of reality and creativity.He has created and released this film to provide a message about the Main Character, Thierry Guetta, and for others, like him, who believe street art can be created easily. Exit Through the Gift Shop follows a man, Thierry Guetta, who initially lives his life through his camera. After observing street art, he discovers a few artists and begins to obsessively follow them around, recording the ‘making-of' and the final piece. Along the way, he interviews them about their creations, and what these artists are trying to display.Throughout this process, Guetta is behind the scope of the lens, as a hidden character should, out of sight and out of mind. With the artist in the spotlight, the audience is provided the images first-hand, along with the artists' definition. Since Guetta never had plans to use the footage, no one would ever see these images, or creations, other than him. This was a harmless concept, for he would lend a hand when needed, and stayed humble overall.While observing the street art, Guetta learned different styles, different creations and the actual creative process behind the works of Fairey, Space Invader and Banksy, to then try and apply art of his own. While Guetta works with Banksy, he earns Banksy’s trust, to the point where secrets are shared. From the beginning of the film, Banksy claims that Guetta has no intention to use the film, after weeks of footage being recorded; Banksy puts Guetta’s focus into question and tells him to make a film out of all the acquired footage. From the making of Guetta’s Film, the idea of Mr.Brainwash was created. At this point, the audience is led to believe that Guetta is trying to get a point across with his creation, although he lacked experience in the creation of film. However, Banksy believes that Guetta still does not have a consistent message that would apply to street art that he wants to share with the world. With Guetta’s opinion, the world is supposed to believe that unique art can be different, as long as it is different in any aspect. Whereas Banksy’s argument is that successful street art is different from any other, while mixing societal culture and propaganda.Banksy explains to the audience that street art is about the lack of monetary gain, and not for the sake of fame, but for fame of a creative aspect. Mr. Brainwash, does not take on Banksy’s way of display. He simply doe s the opposite. Every artist shown in the film has a style of creativity that is consistent with his or her character. Away from Banksy and other artists, he combines the styles and trends, the creative aspect from almost every artist he met over throughout the film, Guetta starts making his own art.After displaying many of his works of art around town, even as the audience could tell, the art was stylized after other artist’s works, even Banksy’s, Guetta holds a show to sell his art for thousands of dollars to those in the media and modern culture who treat these works as art. â€Å"He calls himself Mr. Brainwash, and fills an abandoned television studio with sub-Warholian dreck of his own devising. †(Lane, 2010) Anthony Lane, along with other reviewers believe that the character Guetta, is merely a character, and that someone this, un-talented, would not treat this as real art.This raises important details in the plot, was Guetta a real character? Is this movi e a tale of fiction, or a realistic documentary. Guetta’s art is simplistic in nature, simple to the point in which modern media can understand the symbolism behind each and every detail. Guetta’s art is also detailing older artists work and features that relate specifically to them. As it relates to Banksy’s message, the visitors of the Art show are interviewed about the work they are purchasing and they look at it as new and innovative, they believe that it is different.Banksy’s use of Guetta’s interview footage is paced well, it shows the difference in the rise of his passionate career, to the money-hungry man he has become. This film is about authenticity and whether certain aspects are real or not, and it is quite metaphorical that the film, overall, might be a mock-umentary, while still retaining certain messages. â€Å"about what it means to be a superstar in a subculture built on shunning the mainstream; about how sensibly that culture jud ges, and monetizes, talent. (Ryzik 2010) Guetta’s lack of comprehending the importance of having a message makes for art that offers only appreciation and a name behind the feature. Opposed to inspiration, Guetta is abusing the influence that artists apply to their works to be different, while only slightly changing theirs, he has attained all that he can from the public, money and appreciation. With this kind of art, the attention is not only drawn to himself, but to the original artist as well. Banksy offers the opinion that art was not meant to be viewed this way, which shows that he completely despises the art industry.Evidence was shown earlier in the introduction of Banksy placing his own art in a gallery as a mockery towards the actual pieces that were displayed. After listening to Banksy’s perspective, and Guetta’s, the audience is left in a point between both parties. Everyone that has seen this film raises the question on whether the entire production was merely to push the same message that Banksy explains throughout the film, that art should be shared and exchanged without profit.However, with the lack of a director, or a writer, â€Å"Exit Through the Gift Shop† is exactly the opposite. Banksy’s title is plastered on it, this shows that not only is he approving the fact that this film should be released, it also proves that he didn’t care about all the works done by other artists of the film, while showing them off, unless most of them got a couple bucks to show some art. What Banksy is trying to prove with this idea, and what he is shown trying to teach to Guetta, is basically not to be a sell-out.The artistic work that you do passionately, which you share with society, should be free. It should be to provide the world or the media with insight. A look from a different perspective, or showing the bigger picture. I agree that Banksy does this with his art, and with the film, together this unifies his style . He pushes the limits, and even as we question the authenticity of the film, we are re-viewing, and discussing parts, sharing and making notes, it has become exactly what he wanted, if better.As far as Guetta’s character goes, he is merely just a reflection of our society, he records video for the sake of recording, he ditches his family life to do something he claims is passionate to him, and in the end, ends up selling works of art for thousands of dollars, reflecting nothing that the other artists taught him in the film. References: Lane, A. (2010, Apr 26). Street justice. Retrieved from http://www. newyorker. com/arts/critics/cinema/2010/04/26/100426crci_cinema_lane RYZIK, M. (2010, April 13). Ny times. Retrieved from http://www. nytimes. om/2010/04/14/movies/14banksy. html Cushing, H. , D’Cruz, J and Gay-Rees, J. (2010)Banksy(Director) â€Å"Exit Through the Gift Shop† (Motion Picture). United Kingdom. Acknowledgements: Lab Class – I’d like t o thank everyone that I was grouped with in lab for help with finding a few sources, and an overall discussion about the topics of the paper. Peer Editor – I’d like to thank you for reviewing and editing my work ahead of time, offering me changes and correcting small errors.